The 63MCY14-1B axial piston pump is equipped with a valve plate and a cylinde block. In order to reduce the friction between the piston shoe and the wear plate, as well as the friction between the cylinder block and the valve plate, the product is designed with a hydrostatic balance system. This design provides the product with longer service life. Also, the product has other features, suct as simple structure, high efficient, light weight, and strong self-suction capability.
The working principle of piston pump for press machine:
Most presses use a hydraulic system with a piston pump10MCY14-1B. When the drive shaft rotates the plunger cylinder, the plunger rotates with the plunger cylinder. The plunger is pressed against the swashplate, and they lean against each other. Therefore, the plunger in the rotation of motion, but also in the plunger hole reciprocating linear motion. When the plunger of the press piston pump 25MCY14-1B is pulled out from the cylinder block, the airtight volume in the cylinder block and plunger hole expands, and the hydraulic oil is sucked into the cylinder block of the plunger hole through the oil inlet. When the plunger is pressed into the cylinder block plunger hole, the volume decreases (cylinder block and plunger hole). System work, the hydraulic oil has a certain pressure, the oil outlet discharge hydraulic oil. The system cycle works like this. The control system of 32MCY14-1B piston pump can adjust the working condition of the hydraulic pump, so that the discharge of hydraulic oil can meet the needs of the working device.
Pressure switch
Chinese
Deutsch
Espanol
Francais
Italiano
Portugues
Japanese
Korean
Arabic
Russian