QYL-100 return filter series
How to order:
The models:
Return filter QYL-63, return filter QYL-100, return filter QYL-160, return filter QYL-250, return filter QYL-400
The QYL type return oil filter is located on the return oil pipeline of the system. Its function is to catch pollutants generated or invaded in the system before returning to the oil tank. Therefore, it is the most effective and important filter to control the pollution concentration of the system. East wind filter. Although it is low pressure pipeline, but according to the running condition of the transmission device, there will be pulsation or pressure impact, so the material and strength of components should be fully considered. QYL type oil return filter can be divided into chemical fiber type, paper type, net type and line gap type. Chemical fiber filter has better effect and higher precision than paper filter. It is difficult to clean the chemical fiber filter and paper filter elements after they are blocked. Therefore, the filter element must be replaced. The pressure difference signal device is installed in the return oil filter. When the filter element is blocked due to pollution, the pressure difference in the inlet and outlet reaches 0. 35 the npa, signal switch, at this time should be clean or replace filter the filter cartridge adopts new type fiber filter material, has great capacity of filtration precision is high, the oil, the original advantage such as less pressure loss, large amount, and its filtering precision in absolute filtration precision calibration, filtering than p3, 5, 10 and 20 > 100, filtration efficiency n 99% or higher, in accordance with ISO standards.