Stop valve(Gauge cock) GCT series GCT-02
Specification
This series
stop valve(gauge cock) other models: gauge cock
GCT-03, gauge cock GCLT-02, gauge cock GCLT-03, gauge cock GCT-04, gauge cock GCLT-04
This series stop valve other names: Pressure gauge switch, one-way valve, single-phase throttle valve, needle valve.
Stop valve principle:
GCT, GCLT, KF type stop valve is a small globe valve, used in the oil circuit and pressure gauges to cut off or play a damping role to slow the pressure gauge rapid jitter, can also be used as a general small flow of globe valve or throttle valve. It can be connected directly to the pressure gauge or through a pipe. MS2(rexroth type) six-point stop valve is used to cut off or connect the six oil circuits under test, and can slow the pressure gauge rapid jump.
Drive mode can be selected without drive, connection mode can be selected with screw thread, structure form can be selected with Angle type, seal structure can be selected with soft seal and hard seal, pressure range pn1.00-50mpa, nominal diameter is DN8mm, material can be selected with cast iron, cast steel and stainless steel. As the use range of valve is very wide, the same type of valve in different occasions and operating conditions have different collocation, if you are not professional, you are welcome to inquire our company