Hydraulic piston pump is divided into axial plunger pump and radial plunger pump. Because the radial plunger pump belongs to a new high efficiency pump with high technical content, with constant acceleration, the radial plunger pump will inevitably become the main component of the field of plunger pump use. Do you understand the axial piston pump structure and protection? The following small make up professionals to explain in detail for everyone!

 

Inclined plate axial piston pump usually choose cylinder block rolling, end - face flow distribution. The end face of the cylinder block is inset with a double metal plate and steel oil plate to form a pair of conflicts, and most of the plane is to choose the way of flow distribution, so maintenance comparison is convenient. Distributing oil dish is one of the crucial parts of axial plunger pump, when the pump works, on the one hand the high pressure oil of working chamber faces cylinder body to distribute oil dish, on the other hand distributing oil dish and the oil film pressure between cylinder body to form the hydraulic pressure counterthrust to cylinder body to make cylinder body violate distributing oil dish. The hydraulic pressure Fn is slightly larger than the hydraulic counter-thrust Ff of the oil distribution plate, i.e., Fn/Ff=1.05~1.1, which makes the pump work normally and maintain a higher volume power.

The above:The importance of explosion-proof valve to lifting platform